Brennenstuhl 1298680 Moisture Detector MD
- To determine the moisture content of wood or building materials such as concrete, brick, screed, plasterboard, wallpaper, etc.
- Measuring range of 5 - 50% for wood and 1.5 - 33% for building materials.
- Display over large LCD display (in percent, resolution 0.1%) as well as acoustically (can be switched off).
- Practical "hold" function also enables measuring in places that are difficult to access.
- Automatic shutdown about 3 minutes after last use. Battery low voltage indicator. With protective cap.
- Robust, handy housing with separate battery compartment for 9 V block (delivery without battery).
Brennenstuhl MD moisture detector. To determine the moisture content of wood or building material, such as, e.g. concrete, brick, screed, plasterboard, wallpaper, etc. Measurement range of 5 - 50 percent for wood, or 1.5 - 33 percent for building material. Display on a large LCD display (in percent, resolution 0.1 percent) as well as acoustically (can be deactivated). Practical "hold" function also makes measurement possible at locations difficult to access. Automatic switch-off approximately 3 minutes, after last application. Battery low voltage display. Robust, ergonomic housing with separate compartment for 9 V mono-bloc battery (not included). With protective cap. In blister packaging. IMPORTANT NOTICES Place the probe tips on the surface carefully, do not apply force. Handle the device carefully when the protective cap has been removed. The probes can cause injuries if used improperly. When measuring soil, you will get low readings if the readings are only taken at the surface and higher readings the deeper you press the probes into the soil. The measured value will differ significantly if you take readings in loose or tightly packed flower garden soil. If the probes are set on a metal or a conductive surface, the maximum value of >50< or >33< will appear in the display. Keep the probes clean using a damp cloth and put them back in the protective cap. MD Operating Instructions TECHNICAL DATA: - Power source: 9V DC alkaline block battery (not included in this package) - Automatic shut-down: after 3 minutes - Measurement range: 5% - 50% (wood); 1.5% - 33% (construction materials) - Resolution: 0.1% - Precision: +/– 3% - Reference values for moisture content: Moisture Content wood (%) construction materials (%) 5 – 50 % 1,5 – 33 % Low 5 – 11,9 % 1,5 – 16,9 % Middle 12 – 15,9 % 17 – 19,9 % High 16 – 50 % 20 – 33 % This moisture meter is a useful instrument, for determining the moisture content of wood or construction materials such as concrete, tile, screed, plaster, carpets, etc. Prior to operational start of the device, read the following instructions carefully and keep them for future reference. Operation Note: Be aware that the probe tip can cause injuries if used incorrectly. Put the protective cover back on when the device is not in use. Keep the moisture meter away from children! Inserting the Battery: Remove the battery cover and insert a new battery (9V DC alkaline block battery). Make sure you connect the poles correctly.
1 x MD Moisture Detector